According to statistics, over the past year, the number of fires in industrial and residential premises in our country has significantly decreased compared to the same figures for the period 2014-2015. At the same time, one of the key roles for such positive dynamics was played by the use of special structures, such as fire-resistant doors and partitions TPT-75 by TATPROF.
At the moment, aluminum fire doors and partitions are actively gaining popularity in the construction market. Such designs are applicable in places where a large number of people gather, where there is a high probability of fire and smoke spread, documents and material values are stored, important equipment and engineering communications are located. Aluminum fire doors are the guardians of fire safety for the 21st century. These special products are able to withstand the effects of fire, while allowing you to quickly and safely evacuate people from the building in the event of a fire. However, for a long-term, and most importantly, effective operation of such structures, a number of nuances must be taken into account. According to experts of the TATPROF company, aluminum fire-prevention structures, with active competent operation, can last up to 30 years, while maintaining the main characteristics of special-purpose structures in the "operating mode" - the fire resistance limits.
Time is the most expensive currency of our time, time can save lives, heal from diseases, time affects people, nature, our entire environment, and it is in time that the main indicators of the fire resistance of fire structures are measured:
E - characterizes for what period after the ignition the integrity will be lost.
I - determines the time at which the structure is able to serve as an effective heat insulator, restraining the flow of hot air.
W is an indicator characterizing stability, i.e. the period of time during which the product is able to withstand a hot flame. It should not be higher than the designated level, measured at a distance of 0.5 m from the surface.
The use of low-quality fire-prevention structures is often fraught with serious consequences. Poor quality of the product is manifested by the loss of integrity and heat-insulating ability: a flame arises on an unheated surface for 10 seconds or more, the temperature rises to 300 ° C, while toxic hot gases can penetrate through cracks, holes and cracks. Of course, these negative factors can lead to a serious threat not only to material values, but also to human lives. Such moments must be taken into account, therefore it is important to choose fireproof structures of guaranteed high quality.
The fire resistance limit of fireproof aluminum doors and partitions is selected taking into account the specifics of the domestic or industrial premises where such products are planned to be installed, in accordance with the federal law "Technical regulations on fire safety requirements". Products with the highest fire resistance parameters can effectively contain the spread and penetration of flame, gaseous toxic substances for a maximum amount of time. To achieve high performance in terms of fire resistance, manufacturers carefully study the design component of the product. Fireproof structures have sufficient strength and stability not only under operating conditions, but also during transportation and installation. Moreover, each element of the product, whether it be door fittings, gaskets, assembly seams and other components - all the details, according to the experts of the TATPROF company, properly comply with the established requirements, depending on the current regulatory documents. In such a case, there cannot and should not be “mistakes”. Even at the production stage, fire doors and partitions "TATPROF" of the TPT-75 series undergo multilevel quality control, and until the product is launched on the market - laboratory tests. As a result, the indicators of fire resistance are established, the products are issued with all the necessary technical documentation and certificates of conformity.
The unique configuration of profiles and special fire-resistant materials, compliance with technical requirements during manufacture, as a result of which efficient operation, undoubtedly increase the demand for aluminum fire-prevention structures. in the construction market. Experts recommend installing aluminum fireproof doors and partitions of the TPT-75 series by TATPROF. Such products perform many functions of modern building structures, localizing a fire, blocking the spread of the flame for the maximum possible period of time, while preserving not only the protected premises in the building, but sometimes tens or hundreds of human lives. Aluminum fire-prevention structures multiply the chance to preserve what is so expensive, what is so important for each of us, for the company and for the whole country.
