When arranging a high-quality and functional drainage system, it is imperative to use sand traps. This element is a special part that is included in the surface drainage system and is installed at the lowest point of the structure.
It is from the sand trap that they begin to make markings for connecting drainage channels. In addition, such a device serves to collect and remove a variety of small particles, among which not only sand, but also soil and gravel can be noted. The information below describes in detail the features of the functioning of the sand trap.
Sand trap design
Similar elements can be made of plastic and steel. At the same time, without exception, all options are similar to each other in terms of design features. There are such elements without fail:
- dirt collecting basket;
- treatment pen;
- protective grilles;
- reinforcing attachments.
Such attachments evenly distribute the load and increase the service life. In addition, it is possible to install in places with a sufficiently large surface load.
Despite the complexity from a functional point of view, such traps are fairly easy to clean. They are equipped with special internal waste baskets. In addition, the use of these traps is quite safe.
To prevent various unpleasant situations when people move, these elements are closed from above with special protective grilles. They easily and easily pass all the drains inside, withstand a variety of debris. In other words, it copes well with its main functions.
Features of functioning
These sand traps, intended for the device of the drainage system, perform their main functions during the formation of rain and melt water. They are collected in large quantities and immediately discharged through the trays of the linear drainage system. Such waters are driven by the usual force of gravity, since the drainage system is installed at a slight slope. Wastewater is directed by a sand trap installed at the very end of the chain.
In such an element there is a special basket for collecting sand. All the remaining dirt and leaves sink to the bottom of this structure, and the water quietly continues to move into the adjacent and connected sewer pipes.
Standard sand traps have connections to the sewer pipes in the side walls. If there are no such holes, you can make them yourself. There are necessary blanks for this purpose. They can be purchased in different sizes, depending on which pipes were used in the installation of sewer systems.
Choosing the best option in terms of size and circumference, you can be sure that wastewater will not flow, that the drainage and sewerage system will be connected firmly, there will be no water leaks.
Purchase of sand traps in "STANDARTPARK"
You can buy these devices on favorable terms at STANDARTPARK. It employs qualified personnel who are the best in their field. That is why specialists are ready to provide advice on the selection of a sand trap, also in everything related to the arrangement of a high-quality functional drainage system.
A particular advantage is that the company can be contacted for installation and drainage purposes. Such services are provided on a turnkey basis. All tools and accessories are used from the assortment offered by this company. Thanks to this, drainage services are provided at a fairly favorable cost.
