Structures made from the alt=SP50 system are installed outside buildings and can be used both for shopping and office centers, as well as for residential buildings. By controlling the illumination of the room, such devices help to save on heating in winter and on air conditioning in summer.
In addition, the solar shading from the alt=SP50 system is a stylish architectural and design element. They give the building a modern and finished look.
Light execution
As an external element, the system must be corrosion-resistant and lightweight in order to keep the facade of the building intact and to reduce the load on the supporting structures. That is why the profiles of the alt=SP50 system are made of aluminum, which is lightweight, resistant to corrosion, but at the same time allows you to make structures of the required dimensions.
Sun shading structures from alt=" SP50 are easy to assemble and install, including in the corner areas of buildings, do not require maintenance. At the same time, the design of the system excludes differences during the installation of lamellas "in line".
At different angles
ALT SP50 provides for the use of lamellas with standard sizes from 100 to 280 mm, allowing you to solve a variety of architectural problems. The lamellas can be installed at an angle of 0˚, 15˚, 30˚ and 45˚. For regions with increased wind loads, special reinforced brackets are provided for 240 and 280 mm lamellas.
The system is stationary, there are two options for fixing the lamellas: on the guide and in the female bracket. When mounted on a rail alt=SP50 can be mounted in series or modularly, with preliminary assembly in the workshop.
For the alt=SP50 system, special cracker elements have also been developed, which provide reliable fastening of the lamellas and additional rigidity at the interface with the bracket. These accessories guarantee the stability of the system under both positive and negative wind pressure.
Support
The specialized software "AluPRO", programs for calculating static loads acting on the lamella and the guide, make it possible to simplify the design and calculation of structures from the alt=" SP50 system of sun-protection lamellas. In addition, together with the system, a program is supplied that allows you to select the required pitch of the lamellas, depending on the angle of inclination of the sun to the horizon, the angle of inclination of the lamella and its standard size. Conductors have been developed to simplify the recycling of the system. Technical catalogs, advertising materials provide additional customer support when promoting and working with the system.
ALT SP50 is not a trip to Spain, but a comprehensive solution that will provide comfortable lighting in your home and office for many years. Products can be ordered from the official dealers of the ALUTECH Group of Companies in all regions of Russia, as well as through the “order window” on the website www.alutech-group.com.
