What is common in designing a house and, say, a car wash? In both cases, the architect must avoid risks: rapid deterioration of materials and structures, environmental impact, vulnerability to intruders, high costs of maintaining a comfortable temperature and the required level of illumination. All this is also true when choosing gates for private and industrial facilities. It would seem that it is not an easy task, but it has a simple solution - ALUTECH sectional doors.
Universal sizes, individual installation
ALUTECH sectional doors look respectable on any site. Moreover, due to the variety of designs, their high-quality and aesthetic installation does not interfere with such features of the premises as a high ceiling, a sloping roof or a low headroom.
Another plus to the compatibility of ALUTECH doors with almost any openings is a wide dimensional grid. The maximum size of industrial series products is 8000x7000 mm. Garage doors with tension springs are able to close the opening up to 3500x3085 mm, with torsion springs - up to 6000x3085 mm.
Longevity formula
A large personal or corporate vehicle fleet, a significant flow of customers - in order for the gate to adequately cope with a high load, durable components must be used for them. Thus, for ALUTECH industrial sectional doors, you can order reinforced springs that can withstand up to 100 thousand lifting and lowering cycles. In garage doors, springs with a resource of 25,000 openings and closings are used by default.
For large products, special reinforcing equipment is available: steel profiles, rollers with an extended axle, double side roller brackets.
High resistance to shock and wind loads is another characteristic of ALUTECH garage and industrial doors. It is guaranteed by well-thought-out design solutions. For example, a closed loop of sandwich panels, which involves the connection of external and internal steel sheets from above and below and protects the door leaf from delamination due to impact or heating in the sun. In addition, a special design of intermediate loops is responsible for the reliability of products, which does not allow sagging and warping of the web.
Additionally, ALUTECH offers various types of wickets with standard (168 mm) and low (90 mm) thresholds. With the advent of an additional entrance, the load on the gate will be much less, and their service life will be longer.
Energy efficiency on a private and industrial scale
Some of the thickest and warmest sandwich panels in Europe (40-45 mm) are used in ALUTECH industrial and garage doors. In terms of thermal insulation properties, they can be compared with a 50 or 60 cm brick wall. An important role is also played by the fact that the door guides are installed behind the opening.
Additional protection against heat loss and atmospheric precipitation is provided by special seals, which are installed at the top, bottom and sides of the doors. Together, these solutions provide high-quality thermal insulation, which makes any room more comfortable and allows you to reduce heating costs.
In addition, for ALUTECH doors, you can choose a very useful option - built-in windows. By glazing several sections of the door leaf, you can provide natural light in the room and save on electricity.
No chance for corrosion
In humid conditions, corrosion resistance becomes synonymous with quality for garage and industrial sectional doors. To ensure their long and efficient operation in such a microclimate, ALUTECH Group of Companies applies a two-layer polymer coating to the sandwich panels. It perfectly protects against moisture, which means that corrosion has no chances to leave an unsightly mark on the door leaf.
ALUTECH also offers a special set of corrosion-resistant components: fasteners, cable and rollers made of stainless steel, guides made of galvanized steel with additional polyester powder painting.
In addition, among the company's products there are solutions that improve not the gates themselves, but the microclimate in the room, for example, ventilation grilles for effective ventilation.
Operational safety
ALUTECH sectional doors meet all the requirements of European safety standards. They provide protection against pinching of fingers between the panels, the possibility of cutting or snagging, uncontrolled movement and falling of the canvas.
Additionally, ALUTECH garage and industrial doors can be equipped with a jacking protection system: a special device will reliably block the door leaf and prevent intruders from entering.
Ease of lifting
ALUTECH doors can be operated manually or by means of an electric drive with a control panel. A large selection of Comunello, Marantec, AN-Motors automatics in the range of ALUTECH Group of Companies allows you to automate gates of any size and weight.
Thus, the ease of operation, reliability, safety and other characteristics of ALUTECH sectional doors make it easy to solve the problems facing architects and designers, and to protect the owners of garages, car washes and other premises from any risks and discomfort.
