Tanks and containers are in fairly high demand due to their wide range of applications. They are considered a successful innovative solution in order to accumulate and store wastewater, and, if necessary, reuse it. Such structures are used to create fire-prevention systems, as well as, if necessary, to perform hydraulic protection in the area where there is a possibility of flooding of the territory and the structures located on it. They are also used in agriculture.
For manufacturing, galvanized pipes with an inner diameter of 1.2 to 3.2 meters can be used, and the wall thickness should be at least 2.5 mm. The surface of the pipe is galvanized with a coating thickness of 600 grams per square meter. The containers are delivered in the form of ready-made modules, which are connected with clamps during installation. In case of installation in aggressive environments, tanks can be made additionally coated with polymer.
Advantages of using steel tanks:
- the design, consisting of models, allows you to create containers of different volumes and configurations;
- the lowest cost in comparison with other solutions;
- reliability and strength of the structure;
- thanks to the use of galvanized steel, the service life of the product is increased to 80 years;
- the structure consisting of modules is convenient to transport and install;
- maintaining tightness throughout the entire service life;
- installations can withstand the load of roads and railways;
- there is no need to create an unloading plate, the ability to install on the ground with any relief;
- lightweight structure can be installed on soft ground;
- during installation, there is no need to use crane technology;
- the basic structure has a reinforced housing, which allows installation to a depth of 12 meters.
Where is this construction applicable?
Steel spiral galvanized tanks are widely used today, therefore they are used in the following areas:
- in agriculture for the purpose of collecting and purifying water in order to reduce the negative impact on the soil;
- performs the function of accumulating large volumes of water, thanks to the design, it is possible to regulate the speed and direction of the water flow in the system;
- acts as a hydraulic protection, as it helps to weaken the flow and prevents flooding of the site;
- used by firefighters to create backup water sources;
- collects and stores rainwater, which is further applicable for various purposes;
- in industry it is used to accumulate water for the cooling system of equipment.
The production of structures takes place on modern equipment of high precision, and in the manufacture only the latest technologies are used, which make it possible to achieve high reliability and strength from the finished product. The cost of the structure depends on the volume, as well as the length and diameter of the pipe used. Steel water tanks undergo a sophisticated corrosion protection program, while tanks installed underground undergo additional treatments to be resistant to soil influences, which in turn leads to an increase in price. All finished structures comply with established standards and are subject to quality checks.
If you are interested in buying a product that will meet all your requirements, you should be extremely serious about choosing a manufacturer. He must have extensive experience and an impeccable reputation.
Based on materials -
