Energy-efficient facades with a thin plaster layer are rapidly gaining popularity in the architectural and construction practice in Russia. Today they hold over 50% of the modern facade market and the trend continues to grow steadily.
The correct name for energy-saving plastering systems according to GOST R 53786-2010: "Systems for facade thermal insulation composite with external plaster layers" - SFTK.
Their popularity in almost all types of projects under design and construction - from residential buildings and offices to hospitals and factories - is due to a whole range of advantages. Among them are the availability of an up-to-date regulatory framework, endless architectural possibilities in creating complex and curved shapes, color solutions and decor, fire safety, wall vapor permeability and a comfortable indoor climate, a more affordable price per square meter of the finished facade, maintainability.
However, all the so-called "system solutions" existing today in the field of plaster facades do not bear full corporate responsibility for the overall result of the system's work. In their current state, it is a collection of materials from various manufacturers.
Thanks to the new offer of the TECHNONICOL company - TN FASAD PROFI facade systems, the installation of a plaster facade can move to a higher level of quality and supplier responsibility at the same cost.
For the first time in Russia, the TECHNONICOL company presents to the market participants a facade "cake", each component of which was created at the TECHNONICOL factories or under the control of the company and operates in a single system under a single company brand: from adhesive to thermal insulation based on stone wool and plaster layer.
“Prior to the new proposal of the TECHNONICOL Company, the so-called“system”solutions at the SFTK concerned only individual components, most often - plaster and adhesives. If consumers have problems during the installation or operation of the SFTK, it is necessary to determine their cause, but disagreements often occur regarding the source of the problems and the further responsibility of the component supplier. From now on, one company is responsible to the customer for each component separately and for the entire system for the plaster facade as a whole - comments Alexander Budchenko, head of the SFTK project of the Mineral Isolation direction of the TECHNONICOL company.
TN FASAD PROFI take into account all regulatory requirements for energy efficiency, fire safety, ecology and architectural aesthetics of modern enclosing structures using stone wool insulation.
Facade building systems TECHNONICOL can be used on most types of buildings for industrial and civil purposes, depending on investment and construction conditions, requirements of the architectural project.
“The developed solution of the corporation has a unique advantage. As you know, the facade of a building has an aboveground and an underground part. Until now, no manufacturer has been able to offer a comprehensive insulation solution for the front of a building. Whereas TECHNONICOL, being at the same time a manufacturer of both stone wool and extruded polystyrene foam, has added all SFTC components to its range from plaster and adhesives to decorative coatings and offers a solution for the entire plane of the facade. Thus, together with the use of TECHNONICOL facade systems, the customer receives a single thermal contour of the building facade from a single responsible supplier - from the foundation to the roof,”says Alexander Budchenko.
As a heat-insulating component of the facade in the TN FASAD PROFI system, non-combustible heat insulation based on stone wool is used: this makes the facade fireproof, creates conditions for vapor permeability and a comfortable climate inside the building. The solution also fully meets the preferences of modern customers - the share of facades made with mineral wool amounted to about 60% of the market, and a higher growth rate in the market is observed precisely in the segment of mineral wool systems.
According to the regulatory framework, SFTK, in comparison with other types of wall structures, has an almost complete set of regulatory documents.
Thanks to the efforts of the ANFAS Association, today 11 national standards have been created and put into effect, GOSTs for adhesives, for decorative and protective compositions, two GOSTs for nets, GOSTs for test methods. A separate GOST R 55943-2014 “SFTK. A method for determining and assessing resistance to climatic influences”, taking into account Russian climatic features, criteria for assessing systems and their classification according to the degree of resistance to climatic influences have been created.
From March 1, 2016 came into force GOST R 56707-2015 "Front thermal insulation composite systems with external plaster layers. General technical conditions ". At the stage of development - a set of rules “SFTK. Rules for the design and production of work ".
But today TECHNONICOL is ready to provide architects, designers, builders, developers and private developers with a complete set of necessary design and installation documents. TN FASAD PROFI as a single system: technological maps, albums of technical solutions, step-by-step instructions and manuals.
It is pertinent to note that the modern market requires from the manufacturer not only the creation and production of high-quality materials, but also qualified support for the work of partners at all stages of the construction process - from competent design to correct installation and successful commissioning.
In this regard, TECHNONICOL Corporation has created a unique service in the construction market for contractors and customers - Facade quality service … This is a team of highly qualified engineers who provide technical support for the project at all stages of the facade work - from the start of work to the delivery of the finished facade.
Each step of the TECHNONICOL company is aimed at maximum comfort and long-term positive result in working with materials and complex solutions of the company - from individual components to the regulatory framework and training.
TN FASAD PROFI is a system solution that allows you to achieve maximum results in the design, installation and operation of energy-efficient facades with a thin plaster layer and base / plinth arrangement. Our task is to please owners and investors for many years with the reliability and beauty of our facades.
