It is no coincidence that aluminum has become one of the most demanded materials in modern construction. Due to its lightness, it can be used where a minimum load on the structure fasteners is required. At the same time, the "winged metal" is strong and durable, capable of withstanding significant temperature changes, and does not corrode. Perhaps the only drawback of aluminum is its high thermal conductivity, but this problem was solved.
Translucent facades alt=" F50
Can a facade based on glass and aluminum be energy efficient? Can! If in its manufacture was used
profile system alt=F50 from ALUTECH. The series includes posts and ledgers with a visible width of 50 mm, which makes the finished façade structures look elegant and lightweight.
However, let's return to the problem of keeping warm. Considering that the facades based on alt=F50 have a large glazing area, it was important for the manufacturer to take care of maintaining a comfortable microclimate in the premises.
The solution to the issue was the use of thermal inserts made of solid impact-resistant polyvinyl chloride, a set of gaskets based on EPDM and seals for the seam of the double-glazed window made of foamed materials. The optimal combination of these components has made it possible to significantly increase the thermophysical characteristics of structures: heat transfer resistance> 1 m² ∙ ° C / W.
Moreover, the set of available inserts and gaskets makes it possible to install infills (double-glazed windows, heat-insulating panels) with a thickness of 4 to 62 mm, thus providing additional comfort in the premises.
Stained glass constructions alt=" IGF65
In modern architecture, it is customary to call the extensive glazing of the facade large-sized glasses fixed in metal frames, most often aluminum ones, as stained-glass windows.
For the manufacture of translucent stained-glass structures, the ALUTECH company has developed a system
ALT IGF65. Its distinctive feature is the ability to carry out installation from inside the premises without the use of scaffolding and cradles. The structure is based on combined load-bearing profiles, which are connected to each other using rusk elements.
To ensure high thermal insulation characteristics of the finished structures, the system uses EPDM-based rubber seals, as well as foam seals, which are installed around the perimeter of the glass units.
According to tests carried out at the Research Institute of the Republic of Belarus (BelNIIS), the structures of the alt=" IGF65 stained glass system have record thermal performance: heat transfer resistance - 1.21 m² ∙ ° C / W. Thus, the alt=" IGF65 series is the "warmest" of all ALUTECH aluminum profile systems.
Windows and doors alt=" W62 and alt=" W72 with thermal insulation
Profile systems alt=" W62 and alt=" W72 are 2 more energy-efficient solutions from ALUTECH, which can be used in the construction of windows and doors.
Frame glazing system with thermal break alt=" W62 is used to create window, door and stained glass structures of various configurations. The series is based on combined profiles consisting of aluminum profiles interconnected with polyamide elements. The combination of materials makes the structures truly "warm". The series has a depth of 62 mm and a thermal break with a width of 24 mm. The possibility of installing the filling up to 40 mm allows you to achieve significant indicators of thermal and sound insulation. The reduced resistance to heat transfer is 0.61 m² ∙ ° C / W.
The frame glazing system alt=W72, in turn, allows the production of windows, doors and mixed structures in modern energy efficient buildings. It has a depth of 72 mm and a multi-chamber thermal break with a width of 34 mm. Foam elements help to keep the rooms warm and quiet. In addition, it is possible to install a filling with a thickness of 50 mm, which allows to achieve even higher rates of heat and sound insulation. Heat transfer resistance - 1.0 m² ∙ ° C / W.
In general, "warm" aluminum profile systems "ALUTECH" are suitable for use in both private and commercial construction. Depending on the purpose of the object from the assortment of the Group of Companies, you can choose the optimal solution that will help maintain a comfortable microclimate in the premises.
By the way, you can see with your own eyes modern buildings for various purposes, during the construction of which ALUTECH systems were used, in the video of the Group of Companies. You can order products from representatives of the holding in your region.
