Content:
- Build from scratch according to your tasks or use a ready-made building?
- Reinforced concrete capital construction or Steel structures?
- Practical solutions from Istra ZMK
A project as large as the construction of a plant requires carefully thought out solutions. How to build, where and to whom to entrust the execution of the work? And isn't it better to buy (rent) a finished object, re-profiling it to fit your needs?
Build from scratch according to your tasks or use a ready-made building?
Renting or buying an old factory building seems like the easiest solution, but this option has serious drawbacks:
- the needs of a specific production are not taken into account - the enterprise will have to adjust its technologies to a project developed for other requirements;
- one can only guess about the real state and service life of the structure and hope that conscientious specialists were engaged in its design and construction;
- if the enterprise has to move or close, then selling the old building is unprofitable and generally problematic;
- buying or renting, especially in Moscow and the Moscow region, will cost a round sum.
It seems that turnkey construction is even more expensive, but the experience of the Istra ZMK proves that this is not the case. The company offers solutions that allow you to significantly save on building materials and work, getting the maximum usable area in comparison with other construction technologies. The factory's catalog also contains standard multifunctional ready-made solutions - these are typical buildings of the ISTRA series, which are suitable for various activities.
Reinforced concrete capital construction or Steel structures?
Building a plant is a costly and long-term project in which savings are critical. A turnkey capital building in the central regions of the Russian Federation can cost tens or even hundreds of millions of rubles. The same structure, but made of MetalloKonstruktsii, is significantly cheaper and has high performance characteristics, and, in addition, the construction period is much shorter.
But cost is not the only nuance in the construction of a production facility. For example, truss metal structures, familiar from old Soviet projects, in some cases turn out to be heavy, they require internal support columns, which take up useful space and reduce the possibilities for planning a workshop. And when using Beams of variable cross-section (or Eurobeams - their simplified version) from the Istra ZMK, the width of the unsupported span can reach 62 m, for Eurobeams - up to 32 m.
The construction of factories, factories and workshops is one of the main areas of application for Eurobeams. Over 14 years of operation, Istra ZMK, together with contractors, has implemented more than 100 successful projects, including the construction of industrial buildings of various sizes and purposes. This became possible due to a number of important advantages of the solutions of this manufacturer:
- the lightness of the structures allows you to choose any place for construction - you do not need strong soil and a massive foundation;
- the building is easy to expand - new sections are simply added to one of the sides;
- if necessary, you can change the configuration of the building or even transfer it (this is especially important if the company moves, changes its profile or closes);
- while the design and capital construction takes years and months, the clients of the Istra ZMK receive a turnkey plant for a period of 2-6 months (depending on the size of the facility, the need to create a project and requirements for it);
- Due to the lack of supports in rooms built with T-beams, such buildings have 20% more usable volume than inside a building with truss structures!
The service life of such an object is more than 50 years, while it is resistant to various weather conditions (wind and snow load, significant temperature changes), and with thermal insulation sheathing it is possible to save up to 30% on heating compared to old reinforced concrete workshops.
Practical solutions from Istra ZMK
Istra ZMK is a landmark enterprise for the Russian market. For more than 14 years the company has been engaged not only in the manufacture of metal structures, but also in the development, optimization and comprehensive support of projects of varying complexity.
The capacities and technical base of the Company allow creating individual projects of industrial buildings. Moreover, each future building is tested in the unique ISTRION calculation complex. This software service finds potential problems and allows them to be resolved during the design phase. Thanks to this, costs are reduced by another 10-20%, and a year after the end of construction, a mandatory inspection of the facility is carried out by the plant's engineers, who, if necessary, immediately eliminate the identified deficiencies.
