High-quality, ergonomic and inexpensive solutions for glazing balconies and loggias are still in demand on the market. The ALUTECH Group of Companies offers one of them - a complex system for glazing balconies and loggias ALT100. Seems like you've already heard of her? We are sure that upon closer acquaintance ALT100 will open to you from unknown sides.
Flawless execution of stained-glass windows of various configurations
The ALT100 system allows you to create straight, pivot and curved stained glass windows with three types of integrated sash. A variety of section opening systems allows you to make balconies and loggias of any shape and size cozy and safe. For example, for small rooms from ALT100 profiles, you can make stained glass windows with sliding doors, which will increase the usable area by an average of 1 meter. For spacious loggias, the system provides for the possibility of hinged windows. A universal option is blind glazing sections.
If necessary, profiles of different types can also be combined using corner adapters and connectors. For example, to create a transition from a sliding to a swing or blind structure on the side, as well as to a blind frame at the top or bottom. In addition, the ALT100 system provides for the possibility of implementing continuous stained-glass glazing across the entire line of the balcony or loggia without visible ends of the balcony floor slabs.
Glass, enamel, triplex and other materials with a thickness of 4 to 28 mm can be used to fill stained-glass structures.
Reliability, safety, moisture resistance
The number of leaves in stained-glass windows created on the basis of the ALT100 system depends on the width and height of the required glazing. The size of the sections is selected taking into account the wind loads acting in the region where the object is located, in accordance with the regulatory documentation.
It is characteristic that in any operating conditions, stained-glass windows based on ALT100 will be reliable and safe. All profiles in the system are extruded from virgin aluminum only and coated with polyester powder. This guarantees the structures for more than 50 years of service without corrosion and repair.
Special solutions, such as brush seals and movement limiters, completely eliminate the sliding glass from falling out and rattling in strong gusts of wind. In combination with a latch that locks the sash when closed, they also protect the room from unauthorized entry.
Special drainage holes, plugs and seals provide maximum protection of stained-glass windows from precipitation: they do not allow water to enter the balcony or loggia, drain moisture efficiently, and also prevent the doors from freezing.
Assembly and installation without costly processing
ALT100 series of aluminum profiles for balcony glazing frames is easy to assemble and install, does not require expensive processing equipment. The frame of the supporting structure can be assembled both on site and in the processing workshop, which speeds up and reduces the cost of installation. Additional convenience is provided by the fact that the filling of structures is installed from the inside of the room without the use of scaffolding, cradles and lifting equipment.
Savings - up to 15%
With all the advantages, the ALT100 system is initially 5-7% more affordable than similar systems. In addition, there are several additional factors that increase the attractiveness and competitiveness of the solution. For example, there is no need to install ebbs and railings, plastering and painting the ends of the slabs, as well as the ability to paint the profile in any RAL color without increasing the cost.
Thus, architects and developers have enough reasons to get acquainted with the ALT100 system not only in theory, but also in practice - while working on projects. At the same time, as the experience of ALUTECH clients shows, acquaintance with ALT100 leaves only positive impressions.
