The finishing of the slopes is an important stage in the finishing of the window structure. The process consists in giving the side parts of the window opening an aesthetic appearance, as well as avoiding the penetration of drafts and dampness in the cold season. Konstantin Dozorov, chief expert of the Otkosik company, said: what slopes are better to install on plastic windows and why? We propose to study this issue in detail in order to make the right choice in the direction of strength, quality and durability. Warm, reliable slopes are your comfort of living.
What is a window slope and what requirements should it meet?
Slope - part of the sidewall, located at the junction with the window. It closes the foam, rough finishing the wall, fasteners, it is considered the finishing, final stage of finishing, which hides all the imperfections and gives the entire window structure neatness. The quality of the slope depends on:
- Destruction or preservation of polyurethane foam.
- The presence or absence of fungus.
- Good audibility of all street sounds or complete sound insulation.
- Dampness or heat conservation.
- Condensation or dryness.
- Long service life of the window or need to be replaced after 10 years.
All negative aspects can be avoided by placing the finishing of the slopes at the forefront. It is necessary to address this issue immediately after installing the window structure.
Types of window slopes
There are the following slopes for plastic windows:
- Plastering. They are distinguished by ease of installation. It doesn't matter what shape your window is. It can be rectangular, square, but also round, arched, any non-standard geometric shape. Such a finish can be done by hand, since its process is quite simple. In this case, you will have to spend quite a lot of time, use paint at the end of the finish.
- From drywall. The material is used exclusively indoors. It has a very low cost, which makes it affordable and in demand. Mainly intended for finishing windows with right angles: drywall is cut into pieces, attached to the surface and plastered. It is not used for slopes of windows with complex shapes. As a result, finishing will contain several layers: the material itself, primer, plaster and finishing paint.
- Made of plastic. It is also called sandwich panels. Easy and quick installation of slopes without any processing and additional finishes. The material is fixed, processed at the joints with a sealant - the work is completed.
Plastering - pros and cons
It is considered one of the most inexpensive and convenient ways to finish slopes. You need to apply plaster, then the first layer of putty, level the surface, sand it, then fix everything with the final putty and paint to add beauty. Putty means a mixture of gypsum or cement: it is diluted with water and applied to the surface. Of all types of paint, acrylic is best suited for the topcoat: it is perfectly evenly applied, odorless, and has "breathable" properties.
Pros:
- Convenience of finishing.
- The ability to refine the slopes with your own hands.
- Substantial savings.
- Accurate repair of chips and cracks.
- Using simple tools that are sure to be found in the house.
- Application of non-combustible material.
Minuses:
- The slope may freeze.
- Mold, condensation accumulates on the surfaces, and fungus appears.
- The need to follow a strict sequence during installation: do not apply the next layer until the previous one is completely dry.
- The material requires periodic painting - once every 2-3 years.
- The instability to temperature extremes leads to cracking.
- Lack of noise isolation.
Drywall - pros and cons
Drywall is an inexpensive material that needs to be sealed and primed against fungus. At the end of the work, it must be painted. It has such advantages as:
- Cheapness. The material is cheaper than sandwich panels, affordable for everyone.
- Thermal insulation. Compared to plaster, the material saves enough heat and allows you to save on heating.
- Waste minimization. To create slopes, you can use the trimmings left over from previous repairs.
But drywall also has some disadvantages:
- Complexity of installation.
- The need for additional insulation.
- Lack of moisture resistance.
- Constant care.
Plastic slopes - pros and cons
Plastic slopes are considered the most modern, convenient, practical and durable. You can pick up plastic to match the window so that there is a perfect match. Insulation is placed under the material - mineral wool. As a result, a full-fledged sealing is created: cold, drafts, dampness will not penetrate the room. Installation is quite simple, you can do it yourself, having initial skills regarding repairs.
Advantages of PVC:
- The slope looks beautiful and elegant, sometimes with a glossy shiny surface.
- Maximum protection against noise, moisture and cold.
- Lack of debris during installation.
- Easy to clean: to remove dirt and dust, just wipe with a damp cloth several times. It is not necessary to paint, plaster, reinstall too often.
- Ease of replacing the slope in case of mechanical damage.
- Finishing can be done at any time of the year: temperature indicators do not affect the material.
- PVC does not crack, does not scratch over time.
- Resistant to fading and UV rays.
Of the shortcomings, you can name only one: high cost. After all, quality always requires a decent payment.
Comparison table of materials:
| Characteristics | Plaster | Drywall | Sandwich panel |
| Aesthetic indicators | Yes | Yes | Yes |
| High noise insulation | Not | Yes | Yes |
| The need for care and painting | Yes | Yes | Not |
| Strength | Yes | Not | Yes |
| Affordable cost | Yes | Yes | Not |
Our choice is sandwich panel slopes
We recommend that you choose the sandwich panel slopes. Modern material creates an excellent aesthetic appearance of the window, is durable, shows resistance to negative external environment and temperature changes. It is considered environmentally friendly: it does not cause allergies, does not provoke diseases. And all because only harmless materials that do not emit toxins are used in production.
Window slopes can be installed in a house where pets, children and the elderly live. They will last exactly as long as the glass unit itself. We select sandwich panels and advise you to do the same! Minimize the care of future slopes, create a beautiful, neat look of the window opening, enjoy quality and reliability every day with us.
Where can I order finishing of slopes
Order on this page https://otkosik.ru/ustanovka-otkosov.html the installation of slopes on plastic windows in our company and get a 10% discount on work. We offer fast and professional installation. Self-repair can lead to the fact that you ruin expensive material and spend more than planned. Therefore - contact us. Qualified specialists will arrive at the appointed time and will deprive you of unnecessary troubles: they perform the installation of slopes on plastic windows, installation of window sills, all roughing and finishing work on time.
